F. K. Enterprise

ENKLO Grades
HYDRAULIC AND CIRCULATING FLUIDS

Application areas:
ENKLO grades are suitable for use in circulating system, hydraulic system, enclosed gear boxes,chain drives, compressors, vacuum pumps, mining machinery, machine tools, etc.

Performance benefits:

• High viscosity index - oil can be used under wide operating temperature range
• Superior demulsibility - helps to settle entrained water quickly
• Good antirust property - protects lubricating parts from rusting in the presence of moisture
• Good antiwear property - prevents wear between moving parts under heavy load

Special FeaturesENKLO grades designed for use in circulating systems are made from high viscosity index,chemically stable base stocks which are further fortified with antioxidants, anticorrosion, antiwear and antifoam additives. They meet the requirements of very high pressure systems and also of systems where high pump speeds are encountered.
ENKLO grades possess the following characteristics:

• Right viscosity to satisfy the demands of the hydraulic pump and the designed system
• High viscosity index to restrict viscosity changes under operating conditions
• Good film strength and antiwear properties to minimise wear of pumps, valves, cylinders, pistons etc
• Maximum demulsibility to allow entrained water to settle down
• Excellent corrosion resistance to prevent rusting and corrosion of metal parts
• Resistance to foaming to ensure prompt and efficient functioning
• High chemical stability to ensure long and trouble free service life

Nuto H 46

Hydraulic Oils

Nuto™ H Series oils are good quality anti-wear hydraulic oils intended for industrial and mobile service applications, subjected to moderate operating conditions and requiring anti-wear lubricants. Their effective oxidation resistance and chemical stability support good oil life in moderate to severe applications.

Features and Benefits
•  Good anti-wear performance helps reduce pump wear and prolonging pump life
•  Corrosion protection helps reduce the effects of moisture on system components
•  Filterability to prevent filter blockage even in the presence of water


Applications     
•  Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required
     •  Where hydraulic oil contamination or leakage is unavoidable
     •  Where small amounts of water are unavoidable

HP ENKLO 100

HYDRAULIC AND CIRCULATING OILS


SPECIAL FEATURES

ENKLO grades designed for use in circulating systems are made from high viscosity index, chemically stable base stocks which are further fortified with antioxidants, anticorrosion, antiwear and antifoam additives. They meet the requirements of very high pressure systems and also of systems where high pump speeds are encountered.

ENKLO grades possess the following characteristics: • Right viscosity to satisfy the demands of the hydraulic pump and the designed system • High viscosity index to restrict viscosity changes under operating conditions • Good film strength and antiwear properties to minimise wear of pumps, valves, cylinders, pistons etc • Maximum demulsibility to allow entrained water to settle down • Excellent corrosion resistance to prevent rusting and corrosion of metal parts • Resistance to foaming to ensure prompt and efficient functioning • High chemical stability to ensure long and trouble free service life


SPECIFICATIONS

IS: 1983(Reaffirmed 1993), (Grades 32 to 150) higher viscosity grades are not covered in Indian Standards (IS) but are fortified with same amount of antiwear to give the best protection IPSS 1-09-022, USS 127 and passes Vickers Vane Pump Test.

APPLICATION AREA

ENKLO grades are suitable for use in circulating system, hydraulic system, enclosed gear boxes, chain drives, compressors, vacuum pumps, mining machinery, machine tools, etc.

Aeroshell Fluid 12

SYNTHETIC LUBRICATING OIL FOR GENERAL PURPOSE AIRCRAFT USE

AEROSHELL FLUID 12 is a low volatility synthetic ester oil used in aircraft instruments and also for the general lubrication of aircraft. It is oxidation and corrossion inhibited, and possesses good high and low temperature characteristics. 

ENKLO HLP 68
SPECIAL PURPOSE ANTI-WEAR TYPE HYDRAULIC AND CIRCULATING OILS

Application areas:
Used in hydraulic systems, enclosed gear boxes, chain drives, compressors, vacuum pumps, mining machinery, machine tools, circulating oiling systems etc., wherein oil is recirculated and used for extensive periods. Specially recommended for sophisticated high performance electro-hydraulic or numerically controlled systems.

Performance benefits:

• Resistance to thermal degradation
• Very good hydrolytic stability
• Enhanced filterability
• Improved FZG rating
• Excellent anti-wear properties

Special Features
ENKLO HLP grades are premium quality lubricating oils formulated from highly refined base stocks and carefully selected additives. ENKLO HLP grades offer outstanding anti-wear properties, excellent oxidation stability and a high FZG rating.

APPROVALS
ENKLO HLP 68 grade is approved by ELGI EQUIPMENTS LTD. For use in their screw compressors, ENKLO HLP 32 is approved by VOITH INDIA for use in hydraulic couplings and by L&T MCNEIL LTD, Chennai for injection moulding machinery.

Hyspin VG 46
Rust and oxidation inhibiting hydraulic oils
Verstaile 'R&O' type hydraulic and general purpose lubricating oils for use where 'non-antiwear' is suitable. Applications include bearings, gears, pumps, engines, turbines, cylinders, spindles, and compressors.

MOBIL DTE 746

PREMIUM TURBINE OILS 

Product Description

Mobil DTE™ 700 Series lubricants are the latest addition to the Mobil DTE turbine lubricant family of products, long recognized for their high quality and reliability. Mobil DTE 700 Series are Zinc-Free turbine lubricants specifically designed for use in gas and steam turbine applications. Mobil DTE 700 Series lubricants are formulated with carefully selected basestocks and additives, including antioxidants, rust and corrosion inhibitors and anti-foam agents. These components provide outstanding resistance to oxidation and chemical degradation over time. Mobil DTE 700 lubricants exhibit excellent water separability, resistance to emulsion formation and anti-foaming characteristics which provide reliable operation. Their enhanced air release properties are critical for turbine hydraulic control mechanisms. The performance features of Mobil DTE 700 Series oils translate into excellent equipment protection helping increase turbine operation reliability, enabling reduced downtime and extended oil charge life. Mobil DTE 700 Series performance is evidenced by its ability to meet or exceed a wide range of industry standards and equipment builder specifications for steam and gas turbines used around the world.

MOBIL DTE 846

Superior Performance Turbine Oils Mobil DTE™ 832 and 846 are superior performance turbine oils designed for use in steam turbines, gas turbines and combined cycle gas turbine (CCGT) applications under the most severe operating conditions. These progressive products are based on high quality hydrotreated basestocks for exceptional thermal/oxidation resistance along with specially chosen additives engineered to provide the deposit control and "keep-clean" performance required by severe duty gas turbines as well as excellent water separability needed for steam turbine operation. The formulations also include a non-zinc antiwear system to meet the load carrying requirements of geared turbines.


In addition to meeting the separate requirements of modern steam and gas turbine designs, Mobil DTE 800 Series are excellent choices for combined cycle applications that require a single oil for a gas turbine and a steam turbine run in tandem. Simultaneously meeting both deposit control and water separation requirements is the key performance highlight of this advanced lubricant technology. The excellent thermal/oxidative resistance of Mobil DTE 832 and 846 ensures that they can be operated in the most severe turbine environments. The performance features of Mobil DTE 800 Series oils translate into excellent equipment protection, reliable operation, with reduced down-time and extended oil charge life. These products also provide the ultimate flexibility to the operator because they can be used in all turbine types: steam, gas and geared-turbines.

Mobil Vacuoline 1405
Hydraulic and Way Lubricants
Mobil Vacuoline™ 1400 Series oils are extra high performance lubricants specifically designed to satisfy the requirements of machine tools that use one oil for both hydraulic systems and way lubrication. They are formulated using high quality mineral base oils and a unique additive technology that provides excellent lubricity properties to eliminate stick-slip and chatter of heavily loaded and vertical box ways. They exhibit a high degree of oxidation and thermal stability that increases the service life and helps keep lubricated surfaces clean and free from corrosion or deposits that could detract from finished parts quality and accuracy. Mobil Vacuoline 1400 Series oils provide the optimum balance between these divergent requirements. These products are the result of an innovative technology to meet the low frictional properties required to assure acceptable production levels of quality parts with minimum downtime in today's high output machine tools. They exhibit the ability to inhibit oxidation and the formation of lacquers and deposits on ways and in hydraulic systems while providing excellent load-carrying performance to control component wear and extend equipment service life.

HP ENKLO 100
HYDRAULIC AND CIRCULATING OILS

SPECIAL FEATURES
ENKLO grades designed for use in circulating systems are made from high viscosity index, chemically stable base stocks which are further fortified with antioxidants, anticorrosion, antiwear and antifoam additives. They meet the requirements of very high pressure systems and also of systems where high pump speeds are encountered.
ENKLO grades possess the following characteristics: • Right viscosity to satisfy the demands of the hydraulic pump and the designed system • High viscosity index to restrict viscosity changes under operating conditions • Good film strength and antiwear properties to minimise wear of pumps, valves, cylinders, pistons etc • Maximum demulsibility to allow entrained water to settle down • Excellent corrosion resistance to prevent rusting and corrosion of metal parts • Resistance to foaming to ensure prompt and efficient functioning • High chemical stability to ensure long and trouble free service life

SPECIFICATIONS
IS: 1983(Reaffirmed 1993), (Grades 32 to 150) higher viscosity grades are not covered in Indian Standards (IS) but are fortified with same amount of antiwear to give the best protection IPSS 1-09-022, USS 127 and passes Vickers Vane Pump Test.
APPLICATION AREA
ENKLO grades are suitable for use in circulating system, hydraulic system, enclosed gear boxes, chain drives, compressors, vacuum pumps, mining machinery, machine tools, etc.

ENKLO GRADES
HYDRAULIC AND CIRCULATING FLUIDS

Meets specifications:
IS:10522-1983(Reaffirmed 1993), (Grades 32 to 150) higher viscosity grades are not covered in Indian Standards (IS) but are fortified with same amount of antiwear to give the best protection IPSS 1-09-022, USS 127 and passes Vickers Vane Pump Test.

Application areas:
ENKLO grades are suitable for use in circulating system, hydraulic system, enclosed gear boxes,chain drives, compressors, vacuum pumps, mining machinery, machine tools, etc.

Performance benefits:

• High viscosity index - oil can be used under wide operating temperature range
• Superior demulsibility - helps to settle entrained water quickly
• Good antirust property - protects lubricating parts from rusting in the presence of moisture
• Good antiwear property - prevents wear between moving parts under heavy load

Special Features
ENKLO grades designed for use in circulating systems are made from high viscosity index,chemically stable base stocks which are further fortified with antioxidants, anticorrosion, antiwear and antifoam additives. They meet the requirements of very high pressure systems and also of systems where high pump speeds are encountered.
ENKLO grades possess the following characteristics:

• Right viscosity to satisfy the demands of the hydraulic pump and the designed system
• High viscosity index to restrict viscosity changes under operating conditions
• Good film strength and antiwear properties to minimise wear of pumps, valves, cylinders, pistons etc
• Maximum demulsibility to allow entrained water to settle down
• Excellent corrosion resistance to prevent rusting and corrosion of metal parts
• Resistance to foaming to ensure prompt and efficient functioning
• High chemical stability to ensure long and trouble free service life